Fits Club Car gas 1986-91 carts with the 341cc(KF-82) engine

Limited Availability, Please Call for availability

Short block rebuild kit. Includes valves, gaskets, bearings, seals,connecting rod and crankshaft.ORDER STANDARD PISTON AND RING KIT SEPARATELY

Here are the engine torque spec's:

cylinder head bolts 16-18 ft-lbs

cylinder bolts 25-29 ft-lbs

connecting rod bolts 29-30 ft-lbs

side cover bolts 14-16 ft-lbs

flywheel nut 60-65 ft-lbs

spark plug 15-20 ft-lbs

crankcase bolts 14-16 ft-lbs

cylinder head shroud 8-10 ft-lbs

engine mounting nuts 25-30 ft-lbs

Standard bore on a 341cc (KF-82 side value engine) is 3.150 US To measure oversize .01 Over = .25mm & .02 Over = .50mm

Fits 1984-1991 Club Car with 341cc gas engine

For Club Car gas 341cc engine 1984-1991

For standard bore

Includes piston, rings, wrist pin and clips

Standard bore on a 341cc (KF-82 side value engine) is 3.150 US Measure. .01 Over = .25mm & .02 Over = .50mm

For Club Car gas 341cc engine 1984-1991

For .25mm oversized

Includes piston, rings wrist pin and clips

Standard bore on a 341cc (KF-82 side value engine) is 3.150 US Measure. .01 Over = .25mm & .02 Over = .50mm

For Club Car gas 341cc engine 1984-1991

For .25mm oversized

Includes rings only.

Standard bore on a 341cc (KF-82 side value engine) is 3.150 US Measure. .01 Over = .25mm & .02 Over = .50mm

For Club Car gas 341cc engine 1984-1991

For .50mm oversized

Includes rings only.

Standard bore on a 341cc (KF-82 side value engine) is 3.150 US Measure. .01 Over = .25mm & .02 Over = .50mm

For Club Car gas 341cc engine.

For 1984-1991 Club Car gas 341cc engine

Fits 1984-1991 Club Car 341cc gas engine

For 1984-1991 Club Car DS 341cc gas engine

Camshaft with Gear for 1984 to 1991 Club Car 341cc KF-82 Kawasaki gas engine side valve flat head engine. The only aftermarket camshaft available. 10 times stronger than OEM. Made from SOLID billet steel. OEM#1013965