Fits gas Club Car 1996-up FE350 Carts

Cylinder head fits Club Car gas carts 2009-up with FE350/AS26 engine

OEM#1036156-01

For Club Car DS gas FE350 engine 1996-up

Includes piston, rings, wrist pin and clips.

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

For Club Car DS gas FE350 engine 1996-up.

Includes piston, rings, wrist pin and clips

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

1995 & Newer Club Car FE350 Engine Standard Bore: 3.2703 in. (83.067mm) Piston to Cylinder Clearance: .010 in. Bore Taper (top to bottom): .006 in. Bore Out of Round: .0022 in. max Ring end Gap (top & second): .047 in. max Piston Pin to Piston Clearance: .0023 in. max Connecting Rod Big End Side Play: .013 in. max Standard Crank Pin: 1.4742 in. (37.444mm) Crank Pin Wear: .002 in. FE350 Tune-up Specs Valve Clearance: No Valve Adjustment Neccessary Plug Gap: .028"-.031" Ignition Coil Air Gap Standard.: .3mm (.012") Air Gap Adjustment Range: .25mm-.4mm (.010"-.016") FE350 Tune-up Specs Cylinder Head Bolts: 18 ft lbs Connecting Rod Bolts: 17 ft. lbs. Flywheel Nut: 101 ft lbs Spark Plug: 17 ft lbs Crankcase Bolts: 23 ft lbs Fan Retaining Plate: 7.2 ft lbs Fan Housing: 7.2 ft lbs

Fits Club Car DS & Precedent gas 1992-up with Kawasaki engine

Also fits, Cushman gas with 327 air-cooled engine

Also fits E-Z-GO RXV/TXT 4 cycle gas 2008-up with Kawasaki Engine

Fits 1992-up Club Car DS & Precedent FE290 & FE350 gas engine.

The gasket from the engine to insulator.

For Club Car DS & Precedent and the Carryall & XRT Utility 1992-up with FE290 & FE350 gas engine

For Club Car DS gas FE350 engine 1996-up.

Ring Set ONLY

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

For Club Car gas FE350 engine 1996-up.

For .50mm oversized

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

Crankshaft, left hand 22 tooth fits Club Car gas carts with FE350/AS26 engine

OEM#102430901

Camshaft assembly fits Club Car gas with FE350/AS26 engine

Club Car DS FE290 gas engine 1996-up (OEM #1012867)

Club Car DS FE350 gas engine 1993-up (OEM #1017487)

E-Z-GO gas 4 cycle 1991-up, incudes MCI engine(OEM #26739-G01)

Yamaha clutch side, G11, G14, G16, G19, G20 & G22(OEM #93306-20716)

Crankshaft Bearing. Measures approximately 2.83" (71.9mm) outer diameter and 1.36" (34.9mm) inner diameter x .67" (17mm) wide.